The adhesive for KODAK's Photo Tex Fabric is removable, reusable, and repositionable. It does not remove paint from a primed wall, is safe to apply over wallpaper, applies without wrinkles, and does not rip. This version is compatible with both piezo and thermal printhead technologies.
Technical Specifications
|
Material |
40-45% polyester, 40-45% pulp-cellulose |
|
Gauge |
10 mil (557kg/m): Base 6 mil, liner 4 mil |
|
Weight |
240 gsm |
|
Printer/Ink Compatibility |
Canon, Epson, Encad, Hewlett-Packard, Mutoh, Mimaki, and Roland with pigment-based inks. |
|
Software Setting |
Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application. |
|
Color Matching |
For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software. |
|
Finishing/Post Processing |
Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection. |
|
Lightfastness |
The fading time of inkjet ink is a direct result of the inks you choose and the environment where the print is displayed. Contact the ink manufacturer to determine suitability for a particular application. |
|
Optimal Service Environment |
For printing: 59-77° F, 20-80% Relative Humidity For end use: 0 to 176° F |
|
Handling Recommendations |
Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting. |
|
Ideal Storage Conditions |
50-80° F, 35-65% R.H. A controlled environment is recommended. Store in original packaging. |
|
|
MFG Part number: KPT5400